DEPRAG Smart Documentation

KeepAliveNotReceived

Devices Multi-vendor devices Open Protocol devices OpenProtocolDevices One device

ns=2;s=DEPRAG Smart/Devices/General/OpenProtocol/OpenProtocolDevices/0/KeepAliveNotReceived

The event is triggered as soon as no response is received from the connected Open Protocol Server to a keep alive message sent.

Returns:

Result

The result contains the information that is transmitted with the event.

CellId
Unique number for the cell.

TorqueControllerName
Name of the controller.

JobId
Unique number of the executed job.

BatchSize
If the fitting was part of a fitting series, the total number of fittings in the series is indicated here.

TighteningStatus
Status of the screw connection.
0 = Low
1 = OK
2 = High

AngleStatus
Rotation angle status of the screw connection.
0 = Low
1 = OK
2 = High

TorqueMaxLimit
Upper limit of the torque.

Torque
Value of the torque.

AngleMaxLimit
Upper limit of the angle of rotation.

Angle
Value of the angle of rotation.

LastChangeInParameterSet
Time of the last change in the parameter set of the screwdriving program.

TighteningId
Unique number for the screw connection

RundownAngleStatus
Open Protocol specific property RundownAngleStatus.
0 = Low
1 = OK
2 = High

SelftapStatus
Open Protocol specific property SelftapStatus.
0 = Low
1 = OK
2 = High

PrevailTorqueCompensateStatus
Open Protocol specific property PrevailTorqueCompensateStatus.
0 = Low
1 = OK
2 = High

RundownAngleMax
Open Protocol specific property RundownAngleMax.

CurrentMonitoringMin
Open Protocol specific property CurrentMonitoringMin.

CurrentMonitoringValue
Open Protocol specific property CurrentMonitoringValue.

SelftapMax
Open Protocol specific property SelftapMax.

PrevailTorqueMonitoringMin
Open Protocol specific property PrevailMonitoringMin.

PrevailTorque
Open Protocol specific property PrevailTorque.

SyncTighteningId
Open Protocol specific property SyncTighteningId.

ParameterSetName
Name of the parameter set used for the screw connection.

ResultType
Type of tightening result.
1 = Tightening
2 = Loosening
3 = Batch increment
4 = Batch decrement
5 = Bypass parameter set result
6 = Abort job result
7 = Sync tightening
8 = Reference setup
9 = Batch reset
10 = Job restart

IdentifierResultPart3
Further notes on screw connection.

CustomerTighteningErrorCode
Device-specific error code.

CompensatedAngle
Open Protocol specific property CompensatedAngle.

StartFinalAngle
Open Protocol specific property StartFinalAngle.

PostViewTorqueHigh
Open Protocol specific property PostViewTorqueHigh.

NumberOfStagesInMultistage
Open Protocol specific property NumberOfStagesInMultistage.